TECHNICAL SPECIFICATIONS:
1. Unit Power Supply :
- Engine Diesel Kubota 4 Cylinder V2203-E2B-EU-X3 Made in Original Japan.
- Power 40 Hp/ 3000 Rpm
- Hydraulic Power by Marzocchi ALP3AD60 + ALPPD2A16 Double ( for Rotary, and for
up/down)
- Pressure 3000 Psi/210 bar
- Hydraulic Tank : 80 litre
- Diesel Fuel tank : 30 litre
2. Unit Control Device :
- Hand Control Valve 3Bank 1/2” Monoblock Branded Integral Italy IHV 20-3D/d5
( For Hydraulic Rotation, Hydraulic Winch, And Hydraulic Wire line ).
- Hand Control Valve 3Bank 3/8” Mono block Branded Integral Italy IHV 18-3D/d5
( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ).
- Relief Valve : For Adjustment pressure up/down Integral RV2-1/2” –F,
- Max Pressure 3000 Psi. Regulator Valve : For adjustment flow up/down Integral FRV2-1/2”
- Max flow 150 liter / minute, Brake Valve : For adjustment brake winch and wire line,
- Branded Integral Italy CBV2 ½” 0-3000 Psi, Pressure Gauge : By. Skon USA 0-250 Psi
3. Unit Power Device :
3.1 Rotary Head Motor Jacro 240 5(RH ½”) 4000 Series 109-1116 -006 By. Eaton USA
- Speed Power : 0-1200 Rpm, Power Pressure : 0-3000 Psi, Speed Rotary : 700-1500 Rpm
3.2 Up/Down Cylinder Hydraulic DFM 240 5CH Dia 63 x 73 x 40 x Stroke 1800mm
- Torsi Capacity : 915MM (66641 lb/in), Speed Power : 1000MM/10 Second, In / Out
Port : 1/2” SAI O-ring
3.3 Wire Line Hydraulic Motor Jacro 240 5(RH 2/2) S Series 103-1032-010 By. Eaton USA
- Torsi Capacity : 452NMC (3961 lb/in), Speed Power : 0-250 Rpm, In/Out port : ½” SAI
O-ring -
3.4 Winch Hydraulic Motor Jacro 240 5(RH 2/2) 2000 Series 104-1228-006 By. Eaton USA
- Torsi Capacity : 452NMC (3961 lb/in). Speed Power : 0-250 Rpm, In/Out port : ½” SAI
O-ring
3.5 Cylinder Sleding Gearbox Jacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm
- Torsi Capacity : 542 NMC (5675 lb/in), Speed Power : 0-500Meter/ 1.5 Second, In/Out
port : 5/8” SAI O-ring
3.6 Hydraulic Clamp Chuck Assy Jacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm
- Torsi Capacity : 300 NMC (5675 lb/in),
- Speed Power : 0-1 Meter/ 1.5 Second,
- In/Out port : ½” SAI O-ring
- Oil Cooler : 250 Ltr
- Water Injection Pump : Yanmar TF 85 + Sanchin 120
- Drill Pipe : 50 pipe (seemles) NQ3” / HQ3” @ 3 meter
- Drill Bite : Wingbite / PCD
- Water hose : hose polypipe
- Core barel : Assy NQ / HQ
OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
DRILLING PERFORMANCE
Coal Project:
Open Hole: 50.00 m – 120.00 m /shift
Full Coring: 20.00 m – 90.000 m /shift
Head Office :
Komplek Borneo Paradiso, Ruko Mahogany Blok B #2
Jl. Mulawarman RT 02, Batakan, Balikpapan
Kalimantan Timur - Indonesia 76115
Workshop :
Jl. Ruhui Rahayu II No.80. RT.58 , Kel Sepinggan
Kecamatan Balikpapan Selatan
Balikpapan - Kalimantan Timur 76155
Email :
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Website : www.dutaborneomining.com